Description
ADVANTAGES
- Resistant to weathering and U.V. rays.
- Excellent adhesion on various types of substrates
- Can be applied on damp surfaces
- Paintable after drying
- Is odourless and isocyanate free
- Non-corrosive when boning to metal
- Permanent elasticity and excellent adhesion
- Interior and exterior use
- No shrinkage
- Remains flexible at low (-40°C) and high (+90°C) temperatures
- Ecological (no solvents or isocyanates)
- It is permeable to water vapour.
- Applicable on horizontal and vertical surfaces
- Transitable with use of reinforcing mesh between layers
- Easy to apply
- High performance 1.5 to 3.0 Kg/m2
INDICATIONS
Store in a cool, dry, well-ventilated environment between +5°C and + 25°C, away from sources of heat and moisture. Shelf life 24 months if stored under recommended conditions, as expiry date may be shortened.
APPLICATION
Specially formulated for waterproofing and repairs, with excellent adhesion to most substrates used in construction: cement, concrete, mortar, fibre cement, tiles, ceramics, brick, sheets, etc. It can be used for waterproofing the following construction elements:
- Roofs, terraces and balconies covered with different materials (brick, mortar, concrete, asphalt sheets, etc)
- On vertical walls, to avoid water infiltrations
- Plumbing and drains
- Repairing and filling joints and cracks
- Repairing roof tiles and gutters
- Joints in chimneys and skylights
METHOD OF APPLICATION
PREPARATION
- To achieve perfect adhesion to the substrate, surfaces must be clean and free of dust, grease, oils, pollution, oxides, etc. If necessary, degrease with alcohol, acetone or MEK.
- Surfaces must be smooth with no irregularities.
- Check compatibility with the substrates where it will be applied.
APPLICATION
- The application temperature must be between +5°C and +40°C.
- Mix the product well until the mixture is homogeneous, but without introducing too much air into the product.
- Apply directly with brush, roller or spatula (we recommend obtaining a film thickness between 1.4 and 2.0 mm). If applying in two coats wait at least 1 hour between them depending on the weather conditions.
- We recommend placing a reinforcing mesh between two coats of product so that the surface can be traversed. If the reinforcement mesh is not placed, the surface of the product is only visitable.
- Once the package has been opened, we recommend that it be completely used.
- The yield is 1.5 to 3.0 Kg/m2 of product, approximately 1.4 mm thick, applied in 1, 2 or more coats.
- The curing process begins when it comes into contact with air humidity, this being done from the outside in.
CLEANING
- The tools can be cleaned, with solvente universal (e.g. acetone or alcohol) before the sealant cures. After curing, it can only be removed by mechanical action.
PAINTING
- Can be painted with most water based paints after full cure. Preliminary tests are required.
