SAP: CHC050109
CHEMISOL Anti-Spatter Welding Spray is designed to prevent particles projected by welding from damaging the surfaces to be welded, at the welding point and in the surrounding area.
ADVANTAGES
INDICATIONS
Store the product in a dry location and don’t store it at a temperature under 0°C and over 45°C
After the first usage, conserve in a fresh and dry location, away from heating sources.
| Odor | Characteristic of solvent |
|---|---|
| Relative density at 20°C | 0,55 ÷ 0,59 g/ml |
| Flash point, under 0°C | Extremely flammable |
| Pressure at 20°C | 3/5 bar |
| Vapor pressure at 20°C | <0,01 hPa |
| Vapor density (air=1) | 9 – 12 |
| Viscosity at 50°C (ASTM D 445) | 11 ÷ 24 cst |
| Solubility | Insoluble in water |
| Autoignition temperature (dry residual) | > 400°C |
| Corrosion on copper (ASTM D 130) | 1 |
| Shelf life | 10 years |
APPLICATIONS
Recommended for welding devices and welding areas. It is suitable for autogenous, electric, and inert-gas welding.
INSTRUCTIONS
Before applying, clean the torch and apply the product. Spray onto the mouth of the torch and the surface edges to be welded. Do not spray directly on the flaps to be welded. Shake well before use. Hold the can 20-30 cm away from the surface and in a vertical position. Do not spray excessive amounts of product.
| SAP | ml |  |
|---|---|---|
| CHC050109 | 400 | 12 |