CHEMISOL HAMMER FINISH PAINT

Quick Info Categories: Tag:

CHEMISOL Hammer Finish Paint is a high-quality paint with hammered effect.

Description

ADVANTAGES

  • Fast-drying
  • Good coverage
  • Scratch-free and shockproof
  • Resistant to gasoline, chemicals, diluted cleaners and weather influences

INDICATIONS

The surface should be clean, dry and degreased.
Remove old and loose varnish, rust and sand the surface.
Apply a layer of primer suitable for the surface. After drying, sand the base coat (grain 600).
The spray must be at room temperature. The best temperature of use is between 15°C and 25°C. Before use, shake the spray can for 2 minutes and spray a sample. The distance to the surface to be treated should be approximately 25 to 30 cm.

Additional information

Base

Alkyd resin

EU-VOC solvent percentage

≈ 82% w/w

Solid content

≈ 18% w/w

Coverage

1,25 to 1,75 m2

Drying

After 5 to 10 minutes

Touch

After 10 to 20 minutes

Hardening

After 24 hours

Temperature resistance

Up to 110°C

Shelf life

10 years

Application

APPLICATIONS

Recommended for wood, metal, aluminium, glass, stone and different types of plastic.

INSTRUCTIONS

Apply a thin first layer. After a few minutes apply the topcoat. Before applying the next layer, shake the spray can again.
After use, clean the valve (turn the can upside down and press the nozzle for approximately 5 seconds until only gas comes out).
The drying time depends on the room temperature, air humidity and thickness of the product applied.

Products

SAPmlQnt/box
CHC060301Blue400 ml6
CHC060302Green400 ml6
CHC060303Silver400 ml6

 

Downloads

Product Data Sheet Safety Data Sheet