CHEMISOL FLUORESCENT PAINT

Quick Info Categories: Tag:

CHEMISOL Fluorescent Paint is a high-quality product that produces a luminous effect visible from a distance, even in low light.

Description

ADVANTAGES

  • Fast-drying
  • Fluorescent
  • Excellent adhesion

INDICATIONS

The surface should be clean, dry and free of grease. Remove loose old lacquer, rust and sand the surface. To achieve the best fluorescent effect, apply a layer of white primer. When treating surfaces of plastic, first apply a layer of plastic primer before applying the white primer. After drying, sand the base layer (grain 600).
The surface should be clean, dry and free of grease. The spray must be at room temperature.
The best temperature of use should be from 5°C to 30°C. Before use, shake the spray for 2 minutes and spray a sample. Distance to the surface to be treated is 10 to 12 centimetre.

Additional information

Base

Nitrocellulose binder

EU-VOC solvent percentage

≈ 87% w/w

Solid content

≈ 13% w/w

Coverage

1,25 to 1,75 m2

Drying

After 5 to 10 minutes

Touch

After 10 to 20 minutes

Hardening

After 2 hours

Temperature resistance

Up to 110°C

Shelf life

10 years

Application

APPLICATIONS

To treat treated and untreated surfaces of metal, concrete, stone, wood, glass and different types of plastic.

INSTRUCTIONS

Apply CHEMISOL Fluorescent Paint in several thin layers. Before applying the next layer, shake the spray again.
After use, clean the valve (turn spray upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the room temperature, the humidity of the air and thickness of the lacquer applied.
To improve the resistance to U.V. radiation and weather influences, apply a clear acrylic coat layer.

Products

SAPmlQnt/box
CHC060401Red-Orange400 ml6
CHC060402Yellow400 ml6

 

Downloads

Product Data Sheet Safety Data Sheet