SAP: CHC020201
CHEMISOL Carburettor Cleaner Spray is a high-quality product, suitable for the interior and exterior of carburettors and valves, without the need for disassembly.
ADVANTAGES
INDICATIONS
The surface must be clean, dry and degreased. Sand the surface.
The spray must be at room temperature. The best temperature of use should be from 5°C to 30°C.
Before use, shake the spray can for 2 minutes and spray a sample. The distance to the surface to be treated should be approximately 25 to 30 cm.
| Color | Transparent |
|---|---|
| Base | Hydrocarbons |
| EU-VOC solvent percentage | 100% w/w |
| Odor | Characteristic of solvent |
| Relative density at 20°C | 0,84g/ml |
| Yield | 3 g/second |
| Touch | After 10 to 20 minutes |
| Steam pressure at 20°C | 3 to 4 bar |
| Flashpoint of the active substance | < 21°C |
| Shelf life | 10 years |
APPLICATIONS
Recommended for interior and exterior cleaning of carburettors and valves.
INSTRUCTIONS
Before use, shake the spray can.
1º Stop the engine and let it cool down. Remove the air filter.
2º Spray the outside surface of the carburettor until the dirt has disappeared.
3º Spray the visible parts from the inside of the carburettor.
4º Start the engine at a very limited speed.
5º Spray the CHEMISOL Carburettor Cleaner Spray several times on the air inlet and increase the engine speed.
6º Switch off the engine and install the air filter.
| SAP | ml |  |
|---|---|---|
| CHC020201 | 400 | 12 |