ChemicalsSiliconesCHEMISIL BATHROOM AND KITCHEN SILICONE

CHEMISIL BATHROOM AND KITCHEN SILICONE

Quick Info Categories: Tag:

CHEMISIL Bathroom and Kitchen Silicone is a low-modulus, mono-component sealant that hardens when in contact with atmospheric moisture.

Description

ADVANTAGES

  • Excellent adhesion and high adjustment to movement
  • Fast coating formation
  • Good sealing durability and no loss of volume
  • Solid fungicide action, prevents moulds and bacteria formation, even in the wettest areas
  • It forms an elastic rubber, resistant to U.V. radiation and atmospheric conditions
  • Excellent adhesion on non-porous materials such as glass, aluminium, vitrified elements

INDICATIONS

To apply on porous substrates, such as concrete, it is necessary to mechanically clean the surface using brushes or polishing discs.
Apply the silicone with the help of a gun according to the thickness of the joint, and smooth before forming a coating. The silicone can be cleaned with a solvent before hardens. Once it has hardened, it can only be removed mechanically.
In some materials, there may be adhesion problems and for this reason it is recommended to carry out previous tests.

Additional information

Composition

Silicone elastomer with an acid reticulation system

Appearance

Thixotropic paste

Application temperature

+5ºC to +40ºC

Skin formation time

15 – 35 minutes

Hardness

15 – 20 ShA

Curing speed

2 – 4 mm/24h

Tensile strength

1 – 1,2 Mpa

Module 100% elastic

0.2 – 0.3 Mpa.

Temperature resistance in service

From -50 to +150 ºC

Shelf life

12 months

Elongation at break

500 – 700 %

Application

APPLICATIONS

Recommended for use in bathrooms, kitchens, boats and DIY. Sealing bathtubs, showers, sanitary facilities, sinks and other facilities exposed to moisture.

INSTRUCTIONS

The surfaces must be well cleaned and dry, degreased and free of friable particles that may hinder adhesion. The surfaces should be cleaned with alcohol or with a cleaning product compatible with the material.

 Place the nozzle in the cartridge and cut it to the desired joint width

 Press the sealant with the application gun to flawlessly cover the entire joint, so the flanks remain full.

Spread with a rounded spatula.

Very deep joints should be filled with filling material, preventing the seal from sticking to the bottom. Any modification should be made before the end of the coating forming time.

Products

SAPRALmlQnt/box
CH01210000Transparent30024
CH01210001White901030024

Downloads

Product Data Sheet Safety Data Sheet