CHEMISOL ZINC SPRAY

Quick Info SAP: CHC070103 Categories: Tag:

SAP: CHC070103

CHEMISOL Zinc Spray is a high-quality zinc repair spray for repairing minor damage in galvanized steel surfaces through dipping.

Description

ADVANTAGES

  • Fast-drying
  • Good coverage
  • U.V. resistant without fading
  • Good surface hardness
  • Resistant to gasoline, chemicals and weather influences
  • Resistant to wear and scratch
  • Excellent adhesion

INDICATIONS

The surface should be clean, dry and degreased.
Remove old and loose varnish, rust and sand the surface.
The spray must be at room temperature. The best temperature of use is between 15°C and 25°C. Before use, shake the spray can for 2 minutes and spray a sample. The distance to the surface to be treated should be approximately 25 to 30 centimetres.

Additional information

Color

Silver

Base

Acrylic resin

EU-VOC solvent percentage

≈ 93% w/w

Solid substances percentage

≈ 7%

Yield

0.75 g/second

Coverage

1,25 to 1,75 m2

Drying

Between 5 and 10 minutes

Touch

After 10 to 20 minutes

Hardening

After 2 hours

Shelf life

10 years

Application

APPLICATIONS

Recommended for use on doors, pipe connections, wood and wire fences, gutters, drain pipes, guard rails and containers.

INSTRUCTIONS

Apply CHEMISOL Zinc Spray in several thin layers, and wait at least 5 minutes between each one. Before applying the next layer, shake the spray can again. When desired, after the zinc spray is dry, apply a varnish layer.
After use, clean the valve (turn the can upside down and press the nozzle for approximately 5 seconds until only gas comes out).
The drying time depends on the room temperature, air humidity and thickness of the product applied.

Products

SAPmlQnt/box
CHC0701034006

Downloads

Product Data Sheet Safety Data Sheet