ChemicalsAdhesivesMS POLYMERCHEMIHYB SEAL&BOND 35MS CRISTAL

CHEMIHYB SEAL&BOND 35MS CRISTAL

Quick Info SAP: CH03510000 Categories: Tag:

SAP: CH03510000
CHEMIHYB SEAL&BOND 35MS CRISTAL is a transparent elastic adhesive based on high quality MS Polymers, to make joints between different materials invisible and bonding to most substrates used in construction, the automotive industry, the shipbuilding industry, etc.

Description

ADVANTAGES

  • Professional Quality
  • Crystalline
  • Excellent adhesion on various types of substrates
  • Applicable on damp surfaces ensuring correct adhesion
  • Prevents mold formation
  • Great resistance to UV rays, temperature changes and aging
  • Fast cure
  • Odorless, free of solvents and isocyanates
  • Resistance to aging
  • Indoor and outdoor use
  • Permanent elasticity
  • Remains stable to atmospheric conditions, without aging

INDICATIONS

Please perform adhesion tests before application.
Store in a cool, dry, well-ventilated environment between +5°C and +40°C, away from sources of heat and moisture. Shelf life 24 months if stored under recommended conditions, as it may shorten the term

Additional information

Composition

MS Polymer

Density

1,04 g/cm³

Film formation time

10-15 minutes (23% and 50% h.r.)

Healing speed

2 – 3 mm/24h (23º e 50% h.r.), M.I.

Application temperature

+5ºC to +40ºC

Hardness

40 | DIN 53505

Tensile break

1,5 N/mm2, DIN 53504

Elastic modulus100%

0,65 N/mm2, DIN 53504

Elongation at break

300 % | DIN 53504

Temperature resistance

-40⁰C to +90⁰C

Application

APPLICATIONS

  • Specially formulated for most substrates used in the construction industry, automotive industry, marine industry, etc.
  • Ideal for all gluing and sealing jobs where transparency and elasticity are required, for example, for gluing handles on glass doors, for use in bathrooms, kitchens, etc.
  • Elastic bonding of parts of structures subject to vibration.
  • Approved for indoor and outdoor application according to the EN15651-1 F EXT-INT standard.
  • Approved for use on glass according to EN15651-2 G.
  • Suitable for kitchens and bathrooms as it prevents mold formation – Approved according to EN15651-3 XS for joints in sanitary áreas.

METHOD OF APPLICATION

PREPARATION

  • To achieve perfect adhesion to the substrate, the surfaces must be clean and free of dust, grease, oils, pollution, oxides, etc… If necessary, degrease with alcohol, acetone or MEK.
  • Check the compatibility of SEAL&BOND 35 MS CRISTAL with the substrates where it will be applied.

APPLICATION

  • If necessary, use a joint cord to avoid three-point contact and observe the width/depth ratio defined by the following rule: ideal joint depth = joint width / 2, with a minimum depth of 8mm (check expansion joint table at the end of the document).
  • The application temperature must be between +5°C and +40°C.
  • Apply masking tape to the sides of the joints to protect the places where it should not come into contact.
  • Cut the tip and place it in the cartridge. It is recommended that this cut be made at 45°C, in the diameter required for sealing the joint or bonding.
  • SEAL&BOND 35 MS CRISTAL can be applied with a manual or pneumatic gun.
  • Apply SEAL&BOND 35 MS CRISTAL in uniform strands on the materials to be bonded. After application, use a spatula to smooth the joint or press firmly on the joint of the parts to be glued.
  • The curing process starts when it comes into contact with the humidity in the air, which is done from outside to inside 3mm every 24 hours.

CLEANING

  • Tools can be cleaned with an organic solvent (eg acetone or alcohol) before the sealant cures. After curing, it can only be removed by mechanical action.

PAINTING

  • Paintable with most water or solvent based paints after 48 hours.
  • Pre-tests are required.

Products

SAPmlQnt/box
CH03510000Cristal29012

Downloads

Data Sheet Safety Data Sheet